CONTROL PANEL QUOTE REQUEST FORM First Name Last Name Company Name Street Address City State Zip Code Phone Area Code Phone Number Fax Area Code Fax Number Email Build a panel for either a one or two pump application: No pumping control application is too large. For large applications click here. 1. Number of Pumps: One Two 2. Choose your voltage 120 Single Phase (Up to 16 AMPS) 208 Single Phase (Up to 20 AMPS) *See Below 240 Single Phase (Up to 24 AMPS) *See Below 208 3-Phase (Up to 10 AMPS) 240 3-Phase (Up to 10 AMPS) 480 3-Phase (Up to 10 AMPS) *Single Phase 208 & 240 Volt may require Start Run Cap Circuitry depending on pump make/model 3. Enter Pump Make and Model 4. What switching mechanism do you prefer? Floats Mechanical Alternator Pressure Switch 5. Choose your enclosure NEMA-1 Steel Box (Indoor Only, 2-3 Wk. Delivery) NEMA-3R Steel Box (Wet/Outdoor Application, 2-3 Wk. Delivery) NEMA-4X Fiberglass (Corrosion Resistant, Outdoor) NEMA-4X Stainless Steel (Corrosion Resistant, Outdoor) Controls come standard with: •Audible & Visual Alarms with Silence •Power, Pump & Fault Indicators on Board •Contactor for each motor •Padlocking Enclosure •Motor Circuit Breaker •Transformer Control Circuit •H.O.A. Switches on Board •Low Suction Light on Door (Pressure Switch Only) Choose From Any Standard Options Below (2-3 Week Lead Time) Hand Off Auto Switches on Door UL 508 Labeled Auxiliary Alarm Contact NEMA-1/3R Main Disconnect Switch Power ON Light Seal Fail Light Run Light Choose From Any Custom Options Below (4-6 Week Lead Time) Full Load Amps to 24 per pump motor NEMA-4X Main Disconnect Switch (Fiberglass Only) NEMA-4X Main Disconnect Switch (Stainless Only)NEMA 4X Hand off Auto on Door (Stainless & Fiberglass) Lightning Arrestor Elapsed Time Meter Internal Elapsed Time Meter External Clear Door (Fiberglass Enclosure Only) Seal Failure Circuit Indication Globe Alarm Light Pump Thermal Termination Strip Heater with thermostat Dead Front Inner Door Assembly (4) Mercury Float Switches 20' long cord Start and Run Capacitor with Potential Relay System Low Pressure Light (Pressure Switch Only) Special Requirements and/or Questions and Comments Quote shall be returned via email or fax in one business day or will be mailed in one business day if email and/or fax are not available.
CONTROL PANEL QUOTE REQUEST FORM
First Name
Last Name
Company Name
Street Address
City State Zip Code Phone Area Code Phone Number Fax Area Code Fax Number Email
Build a panel for either a one or two pump application:
No pumping control application is too large. For large applications click here. 1. Number of Pumps: One Two 2. Choose your voltage 120 Single Phase (Up to 16 AMPS) 208 Single Phase (Up to 20 AMPS) *See Below 240 Single Phase (Up to 24 AMPS) *See Below 208 3-Phase (Up to 10 AMPS) 240 3-Phase (Up to 10 AMPS) 480 3-Phase (Up to 10 AMPS) *Single Phase 208 & 240 Volt may require Start Run Cap Circuitry depending on pump make/model 3. Enter Pump Make and Model 4. What switching mechanism do you prefer? Floats Mechanical Alternator Pressure Switch 5. Choose your enclosure NEMA-1 Steel Box (Indoor Only, 2-3 Wk. Delivery) NEMA-3R Steel Box (Wet/Outdoor Application, 2-3 Wk. Delivery) NEMA-4X Fiberglass (Corrosion Resistant, Outdoor) NEMA-4X Stainless Steel (Corrosion Resistant, Outdoor)
Controls come standard with: •Audible & Visual Alarms with Silence •Power, Pump & Fault Indicators on Board •Contactor for each motor •Padlocking Enclosure •Motor Circuit Breaker •Transformer Control Circuit •H.O.A. Switches on Board •Low Suction Light on Door (Pressure Switch Only)
Choose From Any Standard Options Below (2-3 Week Lead Time)
Choose From Any Custom Options Below (4-6 Week Lead Time)
Special Requirements and/or Questions and Comments
Quote shall be returned via email or fax in one business day or will be mailed in one business day if email and/or fax are not available.
37 Forestwood Dr • Romeoville, Illinois, USA • 60446 • PH: 800-323-1665 • Fax: 815-886-6932