MetroMail™ messaging system is a standalone device that
can monitor and report statuses of any electrical device
or system by sending email and text messages through an
Internet connection.
8 electrically separated, optically isolated,
dry digital inputs, 10 to 30 volts, AC or DC, (each
drawing less than 3 mA when supplied with 10 volts)
Input indicator lights show state of each input
circuit (lit when energized/closed)
Status light tells whether unit has power, is
properly configured, and is sending out emails
Network lights indicate LAN activity and connectivity
On-board web server allows configuration of
messages, addresses, and other settings via any
web browser.
Optional password protection of configuration
web pages
DIN rail or screw hole mountable
Outer dimensions of 5" x 4.5" x 1.25"
Industrial temperature rated, from -40° F to
+185° F
Made in the United States of America
Requirements:
10 to 30 volt AC (60 Hz) or DC
power supply with an inline 1-amp fuse (MetroMail™ draws
less than 300 mA when supplied with 10 volts)
Internet connectivity through
a standard Ethernet connection, using a standard or
crossover cable (a cellular data modem with service
may be added where Internet access is absent)
An email account
To send text messages, use your
cellular carrier's email-to-text converter. Sprint example:
(your cellular #)@messaging.sprintpcs.com, e.g., 6305553402@messaging.sprintpcs.com
Note: Email over the Internet is not a guaranteed service;
messages may be significantly delayed.
MetroMail™ Messaging System Configurator
Web browser-based interface for locally or remotely
configuring the network settings, the 8 recipients'
addresses, the 8 electrical inputs and their related
messages.
