Security Chimneys International – Secure Seal SS SSD, and SSID

Features

• For use with Categories I, II, III and IV gas-fired appliances, high-efficiency gas boilers, furnaces, booster heaters, pool heaters, water heaters, unit heaters or tank-less water heaters
• Listed as Type BH gas vent systems for appliances having a rated operating flue temperature of 480°F
• Type L-Vent (SSD only) for venting listed SAS or oil fired appliances certified with Type L low temperature venting system
• Systems are interchangeable; you can go from a single to double-wall with the use of an adapter
• Laser butt-welding reinforces strength and prevents leakage while increasing durability and reliability
• Built-in draw latches provide quick and easy tool-free assembly and disassembly, requiring less time on the job site
• Viton-seals more resistant than silicone against chemicals such as sulfuric acid often found in condensate
• Standard adjustable vent length provides vertical or horizontal adjustment for easy system pitching
• AL29-4C® stainless steel resists the extreme corrosive environments found in condensing boilers, assuring trouble-free operation and longer product life
• Tested and listed to UL-1738 and ULC-S636
• 15 year warranty

Security Chimneys International – CIX/CAX Secure Stack

Features

• The CIX, with its 2″ densely packed insulation, and CAX, with 2″ of air, ensure low heat loss and maximum possible draft
• CIX: certified at 1″ clearance to combustibles and 2″ for grease ducting applications; CAX: certified at 4″ clearance to combustibles
• Thick-gauge 304 or 316 stainless steel inner liner provides a strong and more rigid assembly
• Patented self-centering assembly system combined with low weight simplifies and accelerates installation
• Coupling configuration requires only one locking band on outside of pipe and the use of a regular, less- expensive high-temperature silicone sealant
• Outside casing available in 304 or 316 stainless steel as well as Galvalume® (Aluminum-zinc coated) material for a lower-cost option
• Available in sizes from 5″ to 36″ diameters
Complies with the following:
• UL-103 60″ WC positive-pressure and 1400°F building heating appliance chimney standard
• ULC-ORD959 and ULC-S604 chimney standards
• UL-1978 for grease duct applications
• 1 year and 15 year limited warranty options available

Duravent – PolyPro

Features

PolyPro is superior in performance and easier to install than PVC or CPVC pipe, which were designed for irrigation, not venting. PolyPro has been successfully venting appliances in Europe for over 15 years.
Tested and listed to the ULC S636 standard in Canada.
• Can be cut to desired length
• No messy solvents to work with
• No worrying whether it is warm enough to glue pieces together
• No ugly terminations
• Gasketed connections have a precise, tight seal and does not require installation lubricant
• Terminations remain icicle free in freezing weather
• Tight seal at every joint..expands and contracts with weather and temperature changes, so there is no flexing or cracking in the venting
• Interior of 90° elbows are 88° to prevent standing condensation
• Higher sustained operating temperatures than PVC/CPVC
• Lightweight and easy to install
• Gasketed connections allow for removal and replacement of components
• Corrosion resistant
• 100% recyclable
• No leaching or off-gassing of heavy metals or carcinogens
• Resistant to aromatic hydrocarbons generated by gas combustion
• Resistant to acids and bases
• No chlorides in PolyPro, unlike PVC/CPVC

Venting Systems

Single or Double Wall Category I, II, III or IV for gas appliance applications. Also available pressure stack chimneys for commercial chimney, grease duct and diesel exhaust (generator) applications. Venting systems available are precision engineered and designed for ease of installation. Multiple material options, UL Listed and compliant with all current chimney standards.

Contact Us

(815) 886-9200 or Email Us: info@metropolitanind.com
37 Forestwood Dr., Romeoville, Il 60446